| Course Name |
PDH |
Date |
Author/Speaker |
Type |
| Column Design: Past, Present, Future |
1.5 |
Dec-18 |
Joseph A. Yura, PE, PhD |
Webinar |
| Design of Column Reinforcement [L2] |
1 |
Apr-19 |
Bo Dowswell, PE, PhD |
NASCC |
| Accurate Direct Strength Method (DSM) Prediction of Column Flexural-Torsional Failure Loads |
0 |
Apr-19 |
Pedro B. Dinis, Dinar Camotim and Andre D. Martins; Universidade de Lisboa; Lisbon, Portugal; Alexandre Landesmann; Federal University of Rio de Janeiro; Rio de Janeiro, Brazil |
SSRC |
| Comparison of Steady-State and Transient Thermo-Mechanical Responses of Unprotected Aluminum Columns at Elevated Temperatures |
0 |
Apr-19 |
Jean C. Batista Abreu and Tyler D. Spinello; Elizabethtown College; Elizabethtown, PA; Nicholas A. Soares and Ronald D. Ziemian; Bucknell University; Lewisburg, PA |
SSRC |
| Compression Capacity of Short Cold-Formed Steel Built-Up Columns with Double-Lacing Configuration and Low Sectional Compactness |
0 |
Apr-19 |
M. Adil Dar, Dipti Ranjan Sahoo and Arvind K. Jain; Indian Institute of Technology Delhi; New Delhi, India |
SSRC |
| Design of Fixed-Base Hollow Structural Section Columns Subjected to Large Seismic Drift |
0 |
Apr-19 |
Hye-eun Kong and Matthew R. Eatherton; Virginia Polytechnic Institute and State University; Blacksburg, VA; Benjamin W. Schafer; Johns Hopkins University; Baltimore, MD |
SSRC |
| Flexural-Torsional Deformations of Imperfect Thin-Walled Columns with Continuous Bracing |
0 |
Apr-19 |
Raymond H. Plaut; Virginia Tech; Blacksburg, VA; Cristopher D. Moen; NBM Technologies, Inc.; Blacksburg, VA |
SSRC |
| Post-Buckling Behavior of Thin-Walled Regular Polygonal Tubular Columns Undergoing Local-Distortional Interaction |
0 |
Apr-19 |
Andre D. Martins and Dinar Camotim; Universidade de Lisboa; Lisbon, Portugal; Rodrigo Goncalves; Universidade Nova de Lisboa; Lisbon, Portugal |
SSRC |
| Spherically-Hinged Cold-Formed Steel Equal-Leg Angle Columns: Experimental Investigation and DSM Design |
0 |
Apr-19 |
Kathleen Guimaraes Santana and Alexandre Landesmann; Universidade Federal do Rio de Janeiro; Rio de Janeiro, Brazil; Dinar Camotim and Pedro Borges Dinis; Universidade de Lisboa; Lisbon, Portugal |
SSRC |
| Stability of Columns [S11] |
0 |
Apr-19 |
|
NASCC |
| The Strength of Rotary-Straightened Steel Columns |
0 |
Apr-19 |
Xiaomeng Ge and Joseph A. Yura; University of Texas at Austin; Austin, TX |
SSRC |
| Advances in the Direct Strength Method [S9] |
0 |
Apr-18 |
Alexandre Landesmann, DSc; Michael Seek, PhD, PE |
NASCC |
| Column Design: Past, Present, Future |
0 |
Apr-18 |
Joseph A. Yura; University of Texas at Austin; Austin, TX |
SSRC |
| Column Design: Past, Present, Future [N34] |
0 |
Apr-18 |
Joseph Yura, PE, PhD |
NASCC |
| On the Accuracy of the Current Direct Strength Method (DSM) Design Curve for Columns Failing in Global Modes |
0 |
Apr-18 |
Pedro B. Dinis, Dinar Camotim, and Andr‚ D. Martins; Universidade de Lisboa; Lisbon, Portugal |
SSRC |
| Analysis of Rectangular CFT Columns Subjected to Elevated Temperature |
0 |
Mar-17 |
Zhichao Lai and Amit H. Varma, Purdue University, West Lafayette, IN; Anil Agarwal, Indian Institute of Technology Hyderabad, Telangana, India |
SSRC |
| Design Methods for Columns with Intermediate Elastic Torsional Restraint |
0 |
Mar-17 |
Hannah B. Blum and Kim J.R. Rasmussen, University of Sydney, Sydney, NSW, Australia |
SSRC |
| Spherically-Hinged Short-to-Intermediate Angle Columns Stability, Non-Linear Behavior and DSM Design |
0 |
Mar-17 |
Pedro B. Dinis and Dinar Camotim, University of Lisbon, Lisbon, Portugal |
SSRC |
| Stability Analysis of Steel Columns under Cascading-Hazard of Earthquake and Fire |
0 |
Mar-17 |
Mehrdad Memari and Hussam Mahmoud, Colorado State University, Fort Collins, CO |
SSRC |
| Stability of Columns [S7] |
0 |
Mar-17 |
|
NASCC |
| Stability of Slender Section HSS Columns |
0 |
Mar-17 |
Liya Li, Chang’an Univeristy, Xi’an, China; Lucile Gérard and Nicolas Boissonnade, Laval University, Québec, Canada; Marielle Hayeck, University of Applied Sciences of Western Switzerland - Fribourg, Switzerland |
SSRC |
| The Effects of Accurate Boundary Condition Modeling on Column Stability |
0 |
Mar-17 |
Cliff D. Bishop and Patxi Uriz, Exponent Inc., Menlo Park, CA |
SSRC |
| Analysis and Design of Noncompact and Slender Rectangular CFT Columns Subjected to Ambient and Elevated Temperature |
0 |
Apr-16 |
Zhichao Lai and Amit H. Varma, Purdue University, West Lafayette, IN; Hua Yang, Harbin Institute of Technology, Harbin, China; Anil Agarwal, Indian Institute of Technology Hyderabad, Telangana, India |
SSRC |
| Axial Stability of Columns Composed of Combined Sigma CFS |
0 |
Apr-16 |
Mohamed El Aghoury, Ain Shams University, Cairo, Egypt; Maged T. Hanna, Housing and Building National Research Center, Giza, Egypt; Essam A. Amoush, Higher Technological Institute, Tenth of Ramadan City, Egypt |
SSRC |
| Buckling and Design of Columns with Intermediate Elastic Torsional Restraint |
0 |
Apr-16 |
Hannah B. Blum and Kim J.R. Rasmussen, University of Sydney, Sydney, Australia |
SSRC |
| Dynamic Stability of Deep and Slender Wide-Flange Steel Columns - Full Scale Experiments |
0 |
Apr-16 |
Ahmed Elkady and Dimitrios G. Lignos, McGill University, Montreal, QC, Canada |
SSRC |
| Experimental Examination of Creep Buckling of Steel Columns in Fire |
0 |
Apr-16 |
Mohammed A. Morovat, Michael D. Engelhardt, Todd A. Helwig and Eric M. Taleff, University of Texas at Austin, Austin, TX |
SSRC |
| Experimental Studies on the Composite Action in Wood-Sheathed and Screw-Fastened Built-Up Cold-Formed Steel Columns |
0 |
Apr-16 |
David C. Fratamico, Shahabeddin Torabian and Benjamin W. Schafer, John Hopkins University, Baltimore, MD; Kim J. R. Rasmussen, University of Sydney, Sydney, Australia |
SSRC |
| Experimental Studies on the Composite Action in Wood-Sheathed and Screw-Fastened Built-Up Cold-Formed Steel Columns |
0 |
Apr-16 |
David C. Fratamico, Shahabeddin Torabian, and Benjamin W. Schafer; Johns Hopkins University; Baltimore, MD; Kim J. R. Rasmussen; University of Sydney; Sydney, Australia |
SSRC |
| Full Field Cold-Formed Steel Column Buckling Measurements with High Resolution Image-Based Reconstruction |
0 |
Apr-16 |
Abraham Lama Salomon and Christopher D. Moen, Virginia Polytechnic Institute and State University, Blacksburg, VA; Dave Fratamico and Benjamin W. Schafer, John Hopkins University, Baltimore, MD |
SSRC |
| Full field cold-formed steel column buckling measurements with high resolution image-based reconstruction |
0 |
Apr-16 |
A. Lama Salomon and C.D. Moen; Virginia Tech; Blacksburg, VA; D. Fratamico and B.W. Schafer; Johns Hopkins University; Baltimore, MD To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash |
SSRC |
| Local-Distortional-Global Interaction in Cold-Formed Steel Lipped Channel Columns: Behavior, Strength and DSM Design |
0 |
Apr-16 |
Pedro B. Dinis and Dinar Camotim, Technical University of Lisbon, Lisbon, Portugal; Ben Young, The University of Hong Kong, Hong Kong, China |
SSRC |
| Short-to-Intermediate Slender Pin-Ended Cold-Formed Steel Equal-Leg Angle Columns: Experimental Investigation and DSM Design |
0 |
Apr-16 |
Alexandre Landesmann and Renato Cruz, Federal University of Rio de Janeiro, Brazil; Dinar Camotim and Pedro B. Dinis, Technical University of Lisbon, Lisbon, Portugal |
SSRC |
| Stability Design of Columns with Intermediate Gravity Loads |
0 |
Apr-16 |
Lip H. Teh, University of Wollongong, Wollongong, Australia; Benoit P. Gilbert, Griffith University, Gold Coast, Australia |
SSRC |
